Issue Section:
Prof. Dr. Hakan ÇALIŞKAN
Uşak Üniversitesi
Mühendislik Fakültesi
Makine Mühendisliği Bölümü
Termodinamik Ana Bilim Dalı
hakan.caliskan@usak.edu.tr
2019-2023 © Hakan ÇALIŞKAN
Uluslararası
Use of ASTM Certified Alternative Jet Fuels in Aviation Gas Turbine Engines
Tam metin bildiriUluslararası
Aviation In The XXI-st Century 2022, National Aviation University, 28-30 September 2022, Kyiv, Ukrain.
Yayın yılı: 2022
The Effect of Operating a Diesel Engine Using Diesel Fuel and Biofuel at Different Engine Loads on Energy Efficiency Values
Tam metin bildiriUluslararası
2nd International Conference on Energy, Environment and Storage of Energy (ICEESEN 2022), 1-3 September 2022, Erciyes University, Kayseri, TURKEY. ISBN: 78-625-00-9020-6, pp. 137-140.
Yayın yılı: 2022
THE EFFECT OF OPERATING A DIESEL ENGINE IN DIFFERENT EXHAUST AFTER TREATMENT SYSTEMS ON FUEL CONSUMPTION
Tam metin bildiriUluslararası
INTERNATIONAL KORKUT ATA SCIENTIFIC RESEARCHES CONFERENCE, June 28-30, 2022, Osmaniye Korkut Ata University, Osmaniye, Turkey. ISBN: 978-625-8323-69-6, Volume 2, pp. 567-570.
Yayın yılı: 2022
The Comparison of the Change in Soot Emission Concentration of a Diesel Engine According to Fuel Type and Engine Load
Tam metin bildiriUluslararası
6th International Conference on Innovative Studies of Contemporary Sciences (6. Tokyo Summit), August 1-2, 2022, Tokyo, Japan. pp.143-147,ISBN: 978-625-8213-06-5.
Yayın yılı: 2022
Investigation of NOx Emissions in Real Driving Conditions of a Spark Ignition Engine Under Different Conditions (Farklı koşullar altındaki buji ateşlemeli bir motorun gerçek sürüş koşullarındaki NOx emisyonlarının incelenmesi)
Tam metin bildiriUluslararası
6th International Congress On Life, Social, And Health Sciences In A Changing World, July 02-03, 2022, Turkey, ISBN : 978-605-71461-9-9, pp. 384-387.
Yayın yılı: 2022
INVESTIGATION OF EXHAUST EMISSIONS OF A DIESEL ENGINE OPERATED WITH SPECIFIC BIODIESEL FUEL USING DIESEL OXIDATION CATALYST (DOC) AS AN AFTER TREATMENT SYSTEM
Tam metin bildiriUluslararası
5TH INTERNATIONAL "BAŞKENT" CONGRESS ON PHYSICAL, SOCIAL AND HEALTH SCIENCES, JUNE 11-12, 2022, ISBN : 978-605-71461-8-2, pp. 613-616.
Yayın yılı: 2022
İÇTEN YANMALI MOTORA SAHİP BİR OTOMOBİLİN GERÇEK KOŞULLARDAKİ THC VE CO SÜRÜŞ EMİSYONLARININ FARKLI ÇEVRE KOŞULLARINDA DEĞERLENDİRİLMESİ
Tam metin bildiriUluslararası
5TH INTERNATIONAL "BAŞKENT" CONGRESS ON PHYSICAL, SOCIAL AND HEALTH SCIENCES, JUNE 11-12, 2022, ISBN : 978-605-71461-8-2, pp. 556-560.
Yayın yılı: 2022
Variation of fuel consumption and total particle concentrations of renewable biofuel and fossil diesel fuel depending on engine loads
Tam metin bildiriUluslararası
4. International Conference on Life and Engineering Sciences (ICOLES 2021), September 23-25, 2021, Istanbul, TURKEY. ISBN: 978-605-70978-2-8, pp. 112-122.
Yayın yılı: 2021
THERMO-ENVIRONMENTAL PERFORMANCE ASSESSMENTS OF A MEDIUM-SCALE AERO TURBOJET ENGINE
Genişletilmiş özet bildiriUluslararası
TUBA World Conference on Energy Science and Technology (TUBA WCEST-2021), 08-12 August 2021, Turkey. Conference Book, Submission ID: 106, pp: 259-260.
Yayın yılı: 2021
The effect of the DOC after treatment system on emission gases released by combustion of diesel fuel in a diesel engine
Tam metin bildiriUluslararası
4. International Conference on Life and Engineering Sciences (ICOLES 2021), September 23-25, 2021, Istanbul, TURKEY. ISBN: 978-605-70978-2-8, pp. 104-111.
Yayın yılı: 2021
MULTI-OBJECTIVE OPTIMIZATION OF A MULTISTAGE VAPOR COMPRESSION REFRIGERATION CYCLE
Genişletilmiş özet bildiriUluslararası
TUBA World Conference on Energy Science and Technology (TUBA WCEST-2021), 08-12 August 2021, Turkey. Conference Book, Submission ID: 136, pp: 321-322.
Yayın yılı: 2021
EFFECTS OF DESIGN VARIABLES ON EXERGY AND ENVIRONMENTAL PARAMETERS OF COMMERCIAL TURBOFAN ENGINE
Genişletilmiş özet bildiriUluslararası
TUBA World Conference on Energy Science and Technology (TUBA WCEST-2021), 08-12 August 2021, Turkey. Conference Book, Submission ID: 104, pp: 255-256.
Yayın yılı: 2021
Comparison of diesel no 2 fuel with new biodiesel fuel from waste oils in terms of fuel properties
Tam metin bildiriUluslararası
8th International Conference on Renewable Fuels, Combustion and Fire (FCE’21), 5-7 March 2021, Ankara, Turkey
Yayın yılı: 2021
Assessment of energy analysis results of a diesel engine using DOC after treatment system depending on fuels
Tam metin bildiriUluslararası
6th International Conference on Advances in Mechanical Engineering, October 20-22, 2021 Istanbul, TURKEY. pp. 438–444.
Yayın yılı: 2021
Investigation of Combustion of Kerosene Fuel Used in Aviation
Tam metin bildiriUluslararası
15th International Combustion Symposium (INCOS 2020), September 17-19, 2020, Kayseri, TURKEY.
Yayın yılı: 2020
Exergy analysis and nanoparticle assessment of cooking oil biodiesel and standard diesel fueled internal combustion engine
HakemliÖzgün MakaleQ3 quartileSSCIUluslararası
Energy & Environment, Vol. 31(8) 1303–1317. December, 2020.
Yayın yılı: 2020
Abstract
In this paper, the exergy analysis and environmental assessment are performed to the biodiesel and diesel-fueled engine at full 294 Nm and 1800 r/min. The exergy loss rates of fuels are found as 15.523 and 18.884 kW for the 100% biodiesel (BDF100) (obtained from cooking oil) and Japanese Industrial Standard Diesel No. 2 (JIS#2) fuels, respectively. In addition, the exergy destruction rate of the JIS#2 fuel is found as 80.670 kW, while the corresponding rate of the BDF100 is determined as 62.389 kW. According to environmental assessments of emissions and nanoparticles of the fuels, the biodiesel (BDF100) fuel is more environmentally benign than the diesel (JIS#2) fuel in terms of particle concentration and carbon monoxide and hydrocarbon emissions. So, it is better to use this kind of the 100% biodiesels in the diesel engines for better environment and efficiency in terms of the availability and environmental perspectives.
Article Information
Volume: 31 issue: 8, page(s): 1303-1317
Article first published online: July 2, 2019; Issue published: December 1, 2020
Ibrahim Yildiz1, Hakan Caliskan2, Kazutoshi Mori3
1Department of Mechanical Engineering, Graduate School of Natural and Applied Sciences, Usak University, Usak, Turkey
2Department of Mechanical Engineering, Faculty of Engineering, Usak University, Usak, Turkey
3Department of Mechanical and Precision System Engineering, Faculty of Science and Engineering, Teikyo University, Tochigi, Japan
Corresponding Author:
Hakan Caliskan, Faculty of Engineering, Department of Mechanical Engineering, Usak University, 64200 Usak, Turkey. Email: hakan.caliskan@usak.edu.tr
Yildiz, I., Caliskan, H., & Mori, K. (2020). Exergy analysis and nanoparticle assessment of cooking oil biodiesel and standard diesel fueled internal combustion engine. Energy & Environment, 31(8), 1303–1317.
Comparison of the Emissions of Diesel and Waste Derived Biofuel Under 100 Nm Engine Load
Tam metin bildiriUluslararası
15th International Combustion Symposium (INCOS 2020), Kayseri, TURKEY, Conference Proceeding Book pp. 428-432, September 17-19, 2020.
Yayın yılı: 2020
Thermo-ecological analysis of industrial kilns
HakemliÖzgün MakaleQ1 quartileSCIUluslararası
Journal of Environmental Management, vol. 241, pp. 149–155, Jul. 2019.
Yayın yılı: 2019
Nuclear-Renewable Hybrid Energy Systems
Tam metin bildiriUluslararası
International Conference on Climate Change andthe Role of Nuclear Power
Yayın yılı: 2019
Environmental pollution cost analyses of biodiesel and diesel fuels for a diesel engine
HakemliÖzgün MakaleQ1 quartileSCIUluslararası
Journal of Environmental Management, Vol. 243, pp. 218-226
Yayın yılı: 2019
Abstract
In this study, Japanese Industrial Standard diesel no 2 and waste cooking oil biodiesel fuels are compared in terms of environmental pollution cost analysis. The experiments of the diesel and biodiesel fueled diesel engine are done at 100 Nm, 200 Nm and full load (294 Nm), while engine speed is constant at 1800 rpm. The method used in this study consists of a combination of economic and environmental parameters. According to the analyses, the total environmental pollution cost of the biodiesel is higher than the diesel fuel. On the other hand, the total cost of the CO2 emissions of the diesel fuel is generally found to be higher than biodiesel fuel in terms of the life cycle based environmental pollution cost. The specific environmental pollution cost is found as minimum at full load to be 2.217 US cent/kWh for the diesel fuel and 2.449 US cent/kWh for the biodiesel fuel at full load. On the other hand, the life cycle based specific environmental pollution cost is determined as minimum at full load to be 5.050 US cent/kWh for the diesel fuel and 5.309 US cent/kWh for the biodiesel fuel. The biodiesel fuel has higher values than diesel fuel in terms of the specific environmental pollution cost rates. The maximum total carbon dioxide emission rate is found as 0.2405 × 10−3 kg/kJ for the biodiesel fuel at 100 Nm engine torque and the minimum one is obtained as 0.1884 × 10−3 kg/kJ for the diesel fuel at full load. When the payback periods of the fuels are examined, biodiesel has longer period than diesel. The environmental payback period and life cycle based environmental payback period are also compared for fuels. In this context, the biodiesel has longer environmental payback periods rates than diesel. Consequently, the biodiesel fueled engine has higher environmental pollution cost rates than the diesel fueled engine, while the total carbon dioxide parameter of the diesel fuel is close to the biodiesel fuel’s rate. Also, all of the other environmental parameters of diesel fuel is generally better than biodiesel. Consequently, the diesel fuel is generally better option than the biodiesel considering environmental aspects. For better environmental management, the diesel fuel utilization in the diesel engine is slightly better option than biodiesel fuel in terms of environmental pollution cost analysis.
1st Consultancy Meeting to Develop the Content for Nuclear Energy Series on Nuclear–Renewable Hybrid Energy Systems: TURKEY PERSPECTIVE
Tam metin bildiriUluslararası
1st Consultancy Meeting to Develop the Nuclear Energy Series on Nuclear-Renewable Hybrid Energy Systems
Yayın yılı: 2019
Thermodynamic based ecologic assessment of a kiln
Tam metin bildiriUluslararası
The International Symposium in Environmental Science and Industrial Ecology (ISESIE 2018)
Yayın yılı: 2018
Thermodynamic analysis and nanoparticle assessment of Japanese diesel no 2 fueled truck engine
Abstract
There are two Japanese quality standards for diesel fuels. One of them is JIS K 2204 class which consists of five class diesel fuels as No. 1, No. 2, No. 3, Special No. 1 and Special No. 3 (1S, 1, 2, 3 and 3S, respectively). No. 2 diesel fuel is generally used for highway vehicles (passenger cars, buses and trucks). In this study, Japanese Industrial Standard Diesel No:2 fuel is utilized to run the truck engine under 284.39 Nm load. The thermodynamic analysis and experimental tests are performed to the engine for nano-particle, emission and efficiency assessments. In this regard, the maximum energy rate is found for the energy of fuel (145.209 kW) which is the main component to start the engine. Also, the minimum energy rate is determined for the exhaust gases which are released to the atmosphere. The power of the truck engine is calculated as 53.585 kW and the energy efficiency is found as 31.625%. Furthermore, the maximum particle concentration is determined around 1061/cm3 which is lower than other fuels that compared in this study, and the particle size is measured between 5 nm and 15 nm by using Scanning Mobility Particle Sizer (SMPS).
Thermodynamic analysis and nanoparticle assessment of Japanese diesel no 2 fueled truck engine
Tam metin bildiriUluslararası
The Fourth International Symposium on Hydrogen Energy, Renewable Energy and Materials, HEREM 2018
Yayın yılı: 2018
Thermo-Ecologic Evaluation of a Spray Dryer for Ceramic Industry
HakemliÖzgün MakaleScopus, EIUluslararası
Energy Procedia, vol. 144, pp. 164–169, Jul. 2018.
Yayın yılı: 2018
Thermo-Ecologic Evaluation of a Spray Dryer for Ceramic Industry
Tam metin bildiriUluslararası
2018 The Fourth International Symposium on Hydrogen Energy,Renewable Energy and Materials (HEREM 2018)
Yayın yılı: 2018
Pollution Cost Assessments of a Diesel Engine
Tam metin bildiriUluslararası
2018 The International Symposium in Environmental Science and Industrial Ecology, ISESIE 2018
Yayın yılı: 2018
Pollution cost assessment of a gas turbine
Tam metin bildiriUluslararası
The International Symposium in Environmental Science and Industrial Ecology (ISESIE 2018)
Yayın yılı: 2018
Performance assessment of the proton exchange membrane fuel cell - chemical heat pump hybrid system
HakemliÖzgün MakaleScopus, EIUluslararası
Energy Procedia, vol. 144, pp. 125–131, Jul. 2018.
Yayın yılı: 2018
Performance assessment of the proton exchange membrane fuel cell - chemical heat pump hybrid system
Tam metin bildiriUluslararası
2018 The Fourth International Symposium on Hydrogen Energy,Renewable Energy and Materials (HEREM 2018) , 2018.
Yayın yılı: 2018
Investigation of the energy recovery in the burners of the ceramic factory kiln
HakemliÖzgün MakaleScopus, EIUluslararası
Energy Procedia, vol. 144, pp. 118–124, Jul. 2018.
Yayın yılı: 2018
Investigation of the energy recovery in the burners of the ceramic factory kiln
Tam metin bildiriUluslararası
2018 The Fourth International Symposium on Hydrogen Energy,Renewable Energy and Materials (HEREM 2018)
Yayın yılı: 2018
HYBRID NUCLEAR-RENEWABLE ENERGY SYSTEMS FOR SUSTAINABILITY AND CLIMATE CHANGE MITIGATION IN TURKEY
Tam metin bildiriUluslararası
Technical Meeting on Nuclear–Renewable Hybrid Energy Systems for Decarbonized Energy Production and Cogeneration
Yayın yılı: 2018
Environmental assessments of a micro gas turbine
Tam metin bildiriUluslararası
The International Symposium in Environmental Science and Industrial Ecology (ISESIE 2018)
Yayın yılı: 2018
Energetic and exergetic carbon dioxide equivalents and prices of the energy sources for buildings in Turkey
HakemliÖzgün MakaleQ2 quartileSCIUluslararası
Environmental Progress Sustainable Energy, 37(2), 912–925.
Yayın yılı: 2018
Abstract
In this study, the energy and exergy prices of the coal, diesel oil, electricity, fuel oil, LPG, natural gas, air source heat pump (ASHP) and ground source heat pump (GSHP) along with their energetic and exergetic carbon dioxide (CO2) equivalents are evaluated basing on 12‐month data of 2016 (from January to December) for residential and industrial sectors in Turkey. Also, they are considered as district heating energy sources/fuels to heat the 100 m2 floor area in the residential and industrial applications. For the residential and industrial sectors, the minimum energy & exergy prices and energetic & exergetic CO2 equivalents are found for the GSHP; while the corresponding maximum energy and exergy rates are obtained for the LPG. Also, the quantity of fuel required for the desired period is calculated for each one of the energy sources. If the residential and industrial sectors are considered together, the minimum amount of required fuel is found for the LPG as 16.3 kg/°Ch; while the maximum one is found for the coal (for residential sector) to be 44.25 kg/°Ch. © 2017 American Institute of Chemical Engineers Environ Prog, 37: 912–925, 2018
Emission & Nanoparticle Assessments and Exergetic Comparisons of Cooking Oil Biodiesel and Standard Diesel Fuels Used for Internal Combustion Engine
Tam metin bildiriUluslararası
2018 The International Symposium in Environmental Science and Industrial Ecology, ISESIE 2018
Yayın yılı: 2018
Effect of ammonia fuel fraction on the exergetic performance of a gas turbine
HakemliÖzgün MakaleScopus, EIUluslararası
Energy Procedia, vol. 144, pp. 150–156, Jul. 2018.
Yayın yılı: 2018
Effect of ammonia fuel fraction on the exergetic performance of a gas turbine
Tam metin bildiriUluslararası
2018 The Fourth International Symposium on Hydrogen Energy,Renewable Energy and Materials (HEREM 2018) , 2018.
Yayın yılı: 2018
Thermodynamic Comparison of Various Spray Dryers for Ceramic Industry
Tam metin bildiriUluslararası
International Conference on Engineering Technologies (ICENTE’17), Konya, 2017.
Yayın yılı: 2017
Thermodynamic Assessment of a Gas Turbine for the Ceramic Factory
Tam metin bildiriUluslararası
International Advanced Researches Engineering Congress-2017
Yayın yılı: 2017
The Effect of Evaporator Effectiveness on Unit Exergy Cost of Electricity Generated by an Organic Rankine Cycle
Sustainability assessment of heat exchanger units for spray dryers
HakemliÖzgün MakaleQ1 quartileSCIUluslararası
ENERGY, vol. 124, pp. 741–751, Apr. 2017.
Yayın yılı: 2017
Environmental, enviroeconomic and enhanced thermodynamic analyses of a diesel engine with diesel oxidation catalyst (DOC) and diesel particulate filter (DPF) after treatment systems
HakemliÖzgün MakaleQ1 quartileSCIUluslararası
ENERGY, vol. 128, pp. 128–144, Jun. 2017.
Yayın yılı: 2017
Energy, Exergy, Environmental, Enviroeconomic, Exergoenvironmental (EXEN) and Exergoenvironmental (EXENEC) Analyses of Solar Collectors
HakemliÖzgün MakaleQ1 quartileSCIUluslararası
Renewable and Sustainable Energy Reviews, vol. 69, pp. 488–492, Mar. 2017.
Yayın yılı: 2017
Energy and Exergy Analysis of a Heat Generation Unit for the Spray Dryer
Tam metin bildiriUluslararası
International Advanced Researches Engineering Congress-2017
Yayın yılı: 2017
Energy and Exergy Analyses of HVAC Systems
Thermal Behavior and Energetic Dispersals of Human Body Under Various Indoor Air Temperatures at 50 Relative Humidity
Tam metin bildiriUluslararası
3rd International Conference on Recent Innovation in Science, Technology and Management (ICRISTM-16), Indian Federation of United Nations Associations (IFUNA) C-6, Qutab Institutional Area, New Delhi, India , 2016.
Yayın yılı: 2016
Low Exergy Lowex analysis of a building with a ground source heat pump
Tam metin bildiriUluslararası
2nd International Conference on Innovative Trends in Engineering Science and Technology (ICITESM-16), YMCA, Jai Singh Road, Delhi, India
Yayın yılı: 2016
Exergy and Sustainability Assessments of Flat Plate Solar Thermal Collectors
Tam metin bildiriUluslararası
6th International Conference on Innovative Research in Engineering Science and Management (ICIRESM-16), The Institution of Electric and Telecommunication Engineers (IETE), Lodhi Road, New Delhi, Delhi, India
Yayın yılı: 2016
Environmental Assessment of Solar Collectors
Tam metin bildiriUluslararası
3rd International Conference on Recent Innovation in Science, Technology and Management (ICRISTM-16), Indian Federation of United Nations Associations (IFUNA) C-6, Qutab Institutional Area, New Delhi, India
Yayın yılı: 2016
Energy and Exergy Analyses of Residential Heating with Electrical Energy
Tam metin bildiriUluslararası
6th International Conference on Innovative Research in Engineering Science and Management (ICIRESM-16), The Institution of Electric and Telecommunication Engineers (IETE), Lodhi Road, New Delhi, Delhi, India , 2016.
Yayın yılı: 2016
Isı Değiştiricilerinin Ekserjetik Yönleri Exergetic Aspects of Heat Exchangers
Diğer endeksler (EBSCO PUBLISHING)HakemliÖzgün MakaleUluslararası
MÜHENDİS VE MAKİNA (ENGINEER AND MACHINERY), vol. 54, no. 645, pp. 28–37, Oct. 2013.
Yayın yılı: 2012
Exergy analyses of engines fueled with biodiesel from high-oleic soybeans based on experimental values
HakemliÖzgün MakaleQ4 quartileSCIUluslararası
International Journal of Exergy, Vol. 7, No. 1, pp. 20–36.
Yayın yılı: 2010
Exergetic assessment of a thermal energy storage system coupled with a solar ground heat pump
Tam metin bildiriUluslararası
5th International Ege Energy Symposium and Exhibition (IEESE-5)
Yayın yılı: 2010
Energy and exergy prices of various energy sources along with their CO2 equivalents
HakemliÖzgün MakaleQ1 quartileSSCIUluslararası
Energy Policy, vol. 38, no. 7, pp. 3468–3481, Jul. 2010.
Yayın yılı: 2010
A thermodynamic study on renewable energy based hydrogen production and storage systems
Tam metin bildiriUluslararası
International Conference on Hydrogen Production (ICH2P-2011)
Yayın yılı: 2010
Exergy cost analysis of a diesel engine fueled with various fuels
Tam metin bildiriUluslararası
Global Conference on Global Warming 2009 (GCGW-2009), İSTANBUL, 2009.
Yayın yılı: 2009
Comparing the energetic and exergetic prices of various energy sources for the Turkish residential and industrial applications
Tam metin bildiriUluslararası
1st International Exergy, Life Cycle Assessment and Sustainability Workshop&Symposium (ELCAS)
Yayın yılı: 2009
Güneş Takip Sistemlerinin İncelenmesi
Tam metin bildiriUluslararası
2. Ulusal Güneş ve Hidrojen Enerjisi Kongresi (UGHEK-2008)
Yayın yılı: 2008
TR 
EN